Epoxy ClearCoat – Gloss – 12 oz

Designed by System Three® as moisture barrier coatings, Clear Coat Kits are easy to apply, with no hazardous solvents. These coatings are especially useful in construction where constant immersion is likely, as in boats. The mixed epoxy is applied with a roller, or a brush, without thinning. Each coat is allowed to cure before recoating, and recoating can be done without sanding, if done within three days. For continued exposure to sunlight, a spar varnish coating over the moisture barrier coating is recommended for UV protection. Features: Clear, almost water-white, solvent-free epoxy system Cures to a durable, clear, glossy, blush-free surface Convenient 2:1 mixing ratio Moisture barrier coatings Especially useful in construction where constant immersion is likely, as in boats. Specifications: Type: 2-component, low viscosity, 100% solids epoxy system Size: 12 oz Sheen: Satin Color: Clear Mix Ratio by Weight (resin to hardener): 100/43 Mix ratio by Volume (resin to hardener): 100/50 or 2:1 Total Solids: 100% Mixed Viscosity: 380 CPS Tensile Strength (PSI): 7,800 Tensile Elongation at Break: 8% Flexural Strength (PSI): 12,000 Flexural Modulus (PSI): 375,000 Compressive Strength (PSI): Yield 13,000 – Failure: 26,000 Recommended Use: Directed at, but not limited to, the coating and laminating of fiber composites and wood Application Method: brush or roll on Coverage: approximately 50 sq.ft. with a 3 mil coverage Minimum Application Temperature: 50°F Optimal Application Temperature: 77°F Working Time at 77°F: 60 minutes Gel Time at 77°F: 60 minutes (100g mixutre) Tack FreeTime Thin Film at 77°F: 24 hours Full Cure at 77°F: 72 hours Material VOC (g/L): None What’s Included: (1) Clear Coat Epoxy – Part A – 8 fl.oz. (1) Clear Coat Hardener – Part B – 4 fl.oz.