TurboCone Dust Collector with 2-Micron Canister Kit – 3 HP 3 Ph 230/460V – PM1900TX-CK3

The PM1900 Dust Collector is strong enough to use with planers, wide belt sanders, table saws and most other woodworking machines. The exclusive TurboCone™ improves chip separation to prevent clogging of the filter, and increases packing efficiency of the collector bags. The canister filter offers superior filtering surface area over standard bags, and captures 98% of 2-micron particles. The all-metal duct improves rigidity and air flow. The clear collector bags are large capacity, which means less down-time changing them. Four swivel casters and conveniently located handles allow for easy mobility. Performance: Only fine particles move to the filter chamber making manual cleaning easier and decreasing health concerns Prevention: Prevents the central airflow from floating chips into the filter chamber decreasing rapid performance drop due to premature clogging Efficiency: Chips are better contained for increased packing density requiring fewer collection bag changes Features: TurboCone improves chip separation and collector bag packing efficiency The cone eliminates premature filter clogging for sustained performance All-metal duct construction for rigidity and improved air flow 2-micron canister filters offer over six times filtering surface area of standard bags The large impeller is powered by a 3HP motor for peak performance Triple 4” dust ports allow for several hoses to be attached at the same time Collection bags use a snap ring for rapid installation/removal 10 cubic feet collection bag capacity reduces number of bag changes. Four swivel casters for shop maneuverability Specifications: Length : 46 inch Model Number: 1792074K Overall Dimensions: 61″ x 30″ x 72″ Height: 45″ Width: 23″ Length: 46″ Net Weight: 264 lbs Remote Control: No Sound Rating: 75-90 dB 1-Hose Connection Diameter: 8″ 2-Hoses Connection Diameter: 4″ 3-Hoses Connection Diameter: 4″ Bag Diameter: 20″ Filter Bag/Canister Length: 26″ Collection Bag Capacity: 10 cubic foot Collection Bag Length: 30″ Air Flow @ 4″: 236 cu.ft/min Air Flow @ 8″: 1,782 cu.ft/min Static Pressure: 11.31 inch of water Particle Size (Micron): 86% of 1 micron Velocity @ 4″: 5,200 foot per minute Air Inlet: (1) at 8″ or (3) at 4″ Impeller Diameter: 14″ Impeller Fins: 7 Impeller Material: Steel Separator Tank Diameter: 20″ Separator Tank Height: 10″ Motor Power: 3 HP Motor Phase: 3 Ph Motor Voltage: 230/460V Prewired Voltage: 230V Shipping / Billing Information All shipments must be inspected and any damage reported within 3 days of receipt. Address corrections and cancellations may not be possible once order is submitted. Requested changes may incur additional charges. This product ships direct from the manufacturer: Your order will ship in 4 -7 approximately business days. This product is considered special order. Your account will be charged when you place your order. Express or overnight shipping is not available for this product. Ships by Ground to the 48 contiguous states. Cannot ship to Alaska, Hawaii, PO Boxes, APOs, US Territories, Canada or other foreign countries. Return Information All returns must be pre-approved. Any non-warranty returns must be unused and in original packaging. A 25% restock fee will apply. Customer pays return freight. Please call our Customer Service Dept. at 1-800-535-4482 with any return questions. Warranty Information Because this item is purchased and shipped directly from the manufacturer, their warranty supersedes any offered by Woodcraft.